|
1.
|
Firmly attach bracket
("B") to the electrical box using the screws
("A") supplied with the electrical box.
|
|
| 2. |
Remove
the mounting nut ("D") from the short length of threaded pipe ("C").
|
|
3.
|
Screw
the threaded pipe ("C") securely into the crossbar bracket, usually about 1/4". Be sure
that the
pipe does not extend too far from the wall - you will not
be able to snugly mount the fixture if it does. |
| 4. |
Holding
the fixture close to the electrical box, connect the fixture wires to the
house wiring. If your fixture has a bare ground wire, connect
it as appropriate for your house wiring (Click
here for those instructions).
|
| 5. |
Slip the center hole of the fixture over the
threaded pipe ("C"). |
| 6. |
Finally, screw the mounting nut ("D")
onto the threaded pipe ("C") until the fixture fits
snugly to the wall. |